Nascar Pocono Setups

setup 1:
Ok, this is my pocono setup I just ran some laps with it, the best I did was 50.8 5 times with the setup, I can't remember what it ran when we did the league race, but here's the setup, it should be able to do 50.4 or 50.5 in race trim if someone drives it right, i think that's the times I was running in the league race, I just can't drive it now, trying to get readjusted to the wheel after this past week running the glen with my controller.
But anyways, here's the skinny on the setup, I run it with low ABS and with high STEERING, 3rd gear redlines at 180, and for a reason, you should be downshifting when you brake for the turns so that you pull harder on the straight aways, I ran well in my league race with this, but blew up because I had my tape at 55% like a retard, run 45% and don't overrev your motor like I did and you should be fine
SPLITTER 6.00 TAPE 45% WING 8
[color=blue]SUSPENSION
[color=red]FL 4 8 550 4.5 RL 2 4 175 6.151 11.25 FR SWAY 1 13/16" RE SWAY 11/16" FR 4 8 900 RR 2 4 175 6.0 11.125
[color=blue]TIRES [color=red]FL 21.0 5.0 2.0 RL 22.5 1.8 F TOE 1/2" R TOE -1/8" FR 33.0 -1.6 4.0 RR 37.0 -1.8
[color=blue]WEIGHT [color=red]WEDGE 47.5 FRONT BIAS 48.0 LEFT BIAS 54.2
[color=blue]GEARS [color=red]3.70 1.82 1.4 1.09 .95
BRAKES 75:25 PRESSURE 80% (UNTESTED, COULD BE MADE BETTER WITH HIGHER PRESSURE) STEERING TRIM 0 LOCK 14.5


Setup 2:
SPLITTER 6.00
TAPE 45%
WING 8

SUSPENSION

FL 4 8 550 4.5
RL 2 4 175 6.151 11.25
FR SWAY 1 13/16"
RE SWAY 11/16"
FR 4 8 900
RR 2 4 175 6.0 11.125

TIRES
FL 21.0 5.0 2.0
RL 22.5 1.8
F TOE 1/2"
R TOE -1/8"
FR 33.0 -1.6 4.0
RR 37.0 -1.8

WEIGHT
WEDGE 47.5
FRONT BIAS 48.0
LEFT BIAS 54.2

GEARS
3.70 1.82 1.4 1.09 .95

BRAKES 75:25
PRESSURE 80% (UNTESTED, COULD BE MADE BETTER WITH HIGHER PRESSURE)
STEERING TRIM 0 LOCK 14.5